1/1
Previous Next |
Five axis machining center
Detail
产品规格名称 | DEW400 五轴加工中心 | Specification | DEW400 (5 axis machining center) |
数控系统 | 华中系统HNC-848Di | CNC system | HNC-848Di |
行程 | Travel | ||
X轴行程(mm) | 600 | X-axis travel (mm) | 600 |
Y轴行程(mm) | 450 | Y-axis travel (mm) | 450 |
Z轴行程(mm) | 450 | Z-axis travel (mm) | 450 |
B轴行程(°) | -135°~+135° | B-axis travel (°) | -135°~+135° |
C轴行程(°) | nx360 | C-axis travel (°) | nx360 |
X轴行程关于工作台中心分布(mm) | -300~+300 | X-axis stroke distribution about the center of the workbench (mm) | -300~+300 |
Y轴行程关于工作台中心分布(mm) | -225~+225 | Y-axis stroke distribution about the center of the workbench (mm) | -225~+225 |
主轴端面至工作台面最大距离(mm) | 500 | Maximum distance from spindle end face to worktable (mm) | 500 |
主轴端面至工作台面最小距离(mm) | 50 | Minimum distance from spindle end face to worktable (mm) | 50 |
工作台 | Table | ||
类型 | 直驱 | type | Direct drive |
工作台尺寸(mm) | Φ400 | Table size (mm) | Φ400 |
工作台最大载重水平/倾斜(kg) | 200/150 | Maximum load capacity level/tilt of workbench (kg) | 200/150 |
最大回转直径(mm) | Φ600 | Maximum turning diameter (mm) | Φ600 |
B轴中心至工作台面距离(mm) | 0 | Distance from B-axis center to workbench (mm) | 0 |
B/C轴锁紧方式(气动/液压) | 气动 | B/C-axis locking method (pneumatic/hydraulic) | Pneumatic |
T形槽 | 放射式，数量8均布，宽度12 | T-slots | Radial, quantity 8 evenly distributed, width 12 |
主轴(标配) | Spindle (standard configuration) | ||
主轴类型 | 电主轴 | Spindle type | motor spindle |
主轴锥孔规格 | HSK-A63 | Spindle taper | HSK-A63 |
主轴功率(kW) | S1/S6-40%:25/30 | Spindle power (kW) | S1/S6-40%:25/30 |
主轴扭矩(Nm) | S1/S6-40%:30/45 | Spindle torque (Nm) | S1/S6-40%:30/45 |
主轴转速(rpm) | 20000 | Spindle speed (rpm) | 20000 |
主轴中心出水功能 | 选配 | Spindle center water outlet function | Optional |
刚性攻丝功能 | 配备 | Rigid tapping function | Equipment |
进给 | Feed | ||
X/Y/Z轴快速移动速度(m/min) | 30/30/30 | Rapid feed speed of X/Y/Z axis (m/min) | 30/30/30 |
B/C轴快速移动速度(r/min) | 50/60 | B/C-axis Rapid feed speed (r/min) | 50/60 |
最大切削速度(m/min) | 8000 | Maximum cutting speed (m/min) | 8000 |
精度 | Accuracy | ||
X/Y/Z轴定位精度(mm) | 0.005/0.005/0.005 | X/Y/Z axis positioning accuracy (mm) | 0.005/0.005/0.005 |
B/C轴定位精度(”) | ±7 | B/C-axis positioning accuracy () | ±7 |
X/Y/Z轴重复定位精度(mm) | 0.003/0.003/0.003 | X/Y/Z axis repeated positioning accuracy (mm) | 0.003/0.003/0.003 |
B/C轴重复定位精度(”) | ±4 | B/C-axis repeated positioning accuracy () | ±4 |
刀库(标配) | Tool magazine(standard configuration) | ||
刀库型式 | 圆盘刀库 | Style | Disk cutter magazine |
刀库规格 | HSK-A63 | Specifications | HSK-A63 |
刀库容量(把) | 24 | Capacity (pieces) | 24 |
最大刀具重量(kg) | 8 | Maximum tool weight (kg) | 8 |
最大刀具直径(mm) | Φ80 | Maximum tool diameter (mm) | Φ80 |
最大刀具长度(mm) | 250 | Maximum tool length (mm) | 250 |
机床尺寸 | Machine tool dimensions | ||
机床占地尺寸(长X宽X高)(mm) | 3600X4155X3045 | Overall dimension (LxWxH)(mm) | 3600X4155X3045 |
机床质量 (t) | 6.2 | Machine weight (T) | 6.2 |
所需气压(bar) | 6-8 | Required air pressure (bar) | 6-8 |